Skip to main content
Calibrate a PDF Drawing Plan

This article helps you understand how to calibrate a PDF drawing plan of a field location.

Updated over a month ago

Users on Asite having required privilege can calibrate the PDF drawing plan for the field location. Detailed help is as mentioned below:

1. Navigate to 'Field' tab, the left hand panel will show a list of all projects, click on the required project to expand the list of locations then click on the relevant location to access list of it's sub locations.

2. Click on the location/sub-location which has the drawing plan which you need to calibrate.

3. Now click on location plan icon at the top right to access the drawing plan view. Refer the highlighted portion in the screenshot below.

4. The drawing plan view appears. Click on edit icon on the right.

5. Now click on 'Shapes' link to view shape options which you need to calibrate a drawing plan.

Next, select the required shape.

6. Zoom in as required and select the required area on the drawing plan to highlight and calibrate it.

7. Click on 'Save' button to save the selection.

Now the drawing plan is calibrated and ready to raise location specific forms.



Did this answer your question?